FiiO M9 Portable High-Resolution Lossless Wireless Music Player

New product

  • 3.2" IPS 5-Point Touch Display
  • 480 x 800 Native Resolution at 292 ppi
  • 2GB of Storage + Up to 2TB microSD
  • Dual-Mode Bluetooth 4.2 and Wi-Fi
  • SBC, LDAC, aptX, aptX HD & LHDC Support
  • Samsung Exynos 7270 Processor
  • Dual AK4490EN DACs + Built-In FPGA
  • Use as USB DAC or Bluetooth Transmitter
  • Run 3rd-Party Audio Apps
  • Hi-Res Audio Certified

Rs8,450 tax incl.

Designed to play it all, the M9 Portable High-Resolution Lossless Wireless Music Player from FiiO is packed with dedicated processing technology to help it do just that, and deliver audiophile quality sound when doing it. Embracing the convenience of wireless sound without sacrificing quality, the M9 utilizes Bluetooth 4.2 and supports SBC, LDAC, aptX, 24-bit aptX HD, and LHDC audio to cover nearly any wireless format you want to play.

The M9 also has the ability to wirelessly access music, and can do so from almost anywhere. With built-in Wi-Fi you can stream songs from your computer, nearby DLNA-compatible devices, or via streaming audio apps. You can control these functions and more through the M9's vibrant, 3.2" IPS touchscreen or the more tactile built-in mechanical controls. A built-in 2350mAh LiPo battery can power the M9 and all of its functions for up to 10 hours at a time for all-day entertainment.

Hi-End Audio Components
The M9 is powered by a Samsung Exynos 7270 processor and packed with a plethora of audio processing power. This is made possible in part by the eight-layer HDI PCB that is engineered to allow for more components to be integrated into the compact form-factor of the M9. The processors are designed to help deliver clear, accurate, and noise-free high-end audio.

Dual AK4490EN DACs: Features ≥118 dB signal-to-noise ratio, <5uV noise floor, minimal distortion, and precise audio reproduction
Built-in A3P030 FPGA: Helps to ensure accurate playback, supports ISO, DFF, and DSF formats, and can decode DSD64/128 in hardware
OPA1612 LPF and Dual OPA1622 Op-Amps: The Texas Instruments OPA1612 is used as the low-pass filter, while the TI OPA11622 serves as the current buffer. To achieve single-ended and balanced output, there are two OPA1622 op-amps used that provide up to 77mW (under balanced output) of power under a 300 Ohm load.
USB DAC & Bluetooth Transmitter
The M9 can connect to your computer via its USB Type-C interface, where you can play your audio through the M9 and stream it to your favorite Bluetooth headset.
RGB Status Indicator
An RGB light indicator changes color to let you know what audio format you're listening to at-a-glance, as well as the M9's overall status, such as the indicator going red when the M9 needs to be recharged.
Additional Features
Hi-Res Audio certified
microSD card slot supports (optional) memory cards up to 2TB in size
Single-ended 3.5mm wired headphone jack
Balanced 2.5mm audio jack
USB audio out with support for DoP/D2P
Can receive Bluetooth audio and output it through a coaxial SPDIF out
Supports in-line headphone controls in both CTIA and iOS headsets (play/pause/volume control for Android headphones; play/pause for iOS headphones)
Up to 45 days of standby time in deep sleep mode

Related Products

Browse qua the following product new the we

For Multimedia Setups S/PDIF Coaxial or Optical Input Stereo RCA Audio Output Use with WLAN Headphones 24-bit/192 kHz Support Compact Form

A lightweight IEM designed for fatigue-free listening - the use of an ultra-lightweight polyester diaphragm in its specifically-tuned dynamic driver gives the F1 a natural and relaxed tonality that works well with modern pop music, since each in-ear unit weighs only 2.4 grams, the F1 (unlike many other IEMs) when worn simply disappears from your ears,...

Cutting-edge graphene driver diaphragm, a groundbreaking new material with unprecedented thinness and flexibility Copper-clad aluminum voice coil bring forth even the most subtle of details within the music Polyurethane cable jacket has low microphonic, and is both durable and light weight Crystal clear microphone and call/volume control buttons (volume...

Detachable Cable Design - the F5 is equipped with MMCX connectors and comes standard with a single-ended audio cable with in-line microphone and control, and a 2.5mm balanced cable. Intelligent Control - Hi-Resolution Audio Certified for frequency response up to 40kHz; MFi certified microphone and in-line controls work perfectly with iOS devices.

2.1 in. stereo audio cable with gold-plated angled 3.5 mm plugs Perfect for stacking DAP and amp (i.e. FiiO HS12) High purity copper wiring

The memory foam eartips provided in the FiiO F9 PRO have been very popular among the users. In order to let more customers to get these lovely eartips to enjoy high quality music, we hereby sell it separately with the name of HS17. It comes with 3 pairs in the same one-fits-all size. The greatest benefit of using the memory foam eartips is to reduce...

Dual Layer Hard Carry Case Dual Zippers for Maximum Convenience Carabiner clip for clipping on to belts and bags etc. Hard Storage pouch to protect against knocks Net-woven inner compartments for storing SD cards and other accessories

Waterproof/sealed case to protect your equipment from the elements Tough and rugged polycarbonate outer shell with soft TFU interior lining Weighs only 100 grams (3.5 oz) Outside: 4.4 x 3.2 x 1.5 in.; Inside: 3.75 x 2 x 1.3 in.

9.2mm Dynamic Driver 2 x Balanced-Armature Drivers Frequency Response: 15 Hz to 40 kHz Certified High-Resolution by JAS Interchangeable Cables Use MMCX Connect Includes 2.5mm Balanced Cable Includes 3.5mm Cable with In-Line Control Includes Waterproof Case Includes Six Pairs of Ear Tips

450 mW at 16Ω Power Output Fully Discrete Bass Boost Circuit Approximately 16 Hour Run Time 1400 mAh Rechargeable Battery 20 to 20,000 Hz Frequency Response All-Aluminum Alloy Body Shields Against EM Interference OPA1642 Voltage Pre-Amplifier AD8397 Power Amplifier Low - High Gain Toggle Switch

14.8mm large diameter dynamic driver Comfortable wearing in exquisite design In-line remote and microphone High quality 3.5mm L-shaped gold plated jack

Created with advanced industrial-grade 3D printers utilizing DLP printing technology Specially-customized balanced armature driver co-developed by FiiO and Knowles Skin-friendly resin outer shell for maximum wearing comfort and long-term durability Arresting ripple texture faceplate complemented by an equally stunning transparent body Detachable MMCX...

Quad Knowles Balanced Drivers DLP 3D Printed Made with Medical Grade Resin Hypoallergenic and Antimicrobial

Bluetooth 5.0 Transmitter for ATH-M50x Qualcomm QC3005 Bluetooth Chip AAC / SBC / aptX / aptXLL TPA6132A2 Headphone Amplifier

5.15" Bezel-Less Touchscreen Display 720p Resolution with 18:9 Aspect Ratio Samsung Exynos 7872 Hexa-Core Chipset Dual AK4493 DACs + OPA926 Op-Amp Chips

MMCX 2.5mm Balanced Headphone Cable Compatible models: FiiO FH1/F9/F9 PRO

3.2" TFT Touchscreen Display 480 x 800 Native Resolution at 292 ppi Quad-Core Exynos 7270 14nm Processor 2GB Internal Storage, microSD Card Slot Built-In Rechargeable 30-Hour Battery Bluetooth 4.2 with aptX and aptX-HD Supports LDAC, PCM, DSD & FM Radio USB Type-C Port 3.5mm Stereo Headphone/Line Output Includes Cable, Case & Screen Protector

Red and Blue Available Leatherette Case, Strong and wear resistant Magnetic Opening and Closing Mechanism

【Powerful Bluetooth core has the last word on your music】Listen to your lossless music the way it was meant to be heard, but without the mess of wires, anytime anywhere. The FB1 utilizes the Qualcomm CSR8645 Bluetooth 4.1 chip, which supports the SBC, AAC, and aptX audio codecs to ensure you get the best out of your music. 【Three-button multi-function...

Official FiiO stacking kit for the 3rd generation X5 music player Stack X5-III with an amp or DAC and retain access to all player controls Comes with frame, silicone pad, set of large silicone belts (4), and set of small silicone belts (4) NOTE: Stacking kit only. No player, amp, DAC, or cables are included with this kit.

Design Inspired by Exotic Supercars S.TURBO Technology Independent Sound Tubes 3 x Knowles Balanced-Armature Drivers 1 x 10mm Dynamic Driver for Bass MMCX Connectors 3.5mm Single-Ended Cable Includes 4 Sets of Eartips

Three drivers: one 9.2mm dynamic driver specifically tuned to produce bottomless lows and two Knowles balanced armature TWFK-30017-000 to give the F9 Pro immense capabilities in resolving every last detail Detachable cable design with MMCX connectors, supplied with both a single-ended audio cable with in-line microphone and control and a 2.5mm balanced...

Bluetooth Receiver for Wireless Devices Built-In Amp & DAC For High-Fidelity Supports Multiple Codecs Support for NFC Pairing Chipset Ensures Stability & Sonics Hardware & Remote App Controls 1 x 3.5mm Headphone Output Inline Microphone for Calls USB DAC for Computers Includes USB Type-C Cable

Bluetooth Receiver for Wireless Devices Built-In Amp & DAC For High-Fidelity Supports Multiple Codecs Support for NFC Pairing Chipset Ensures Stability & Sonics Hardware & Remote App Controls 1 x 3.5mm Headphone Output Inline Microphone for Calls USB DAC for Computers Includes USB Type-C Cable

For Computers, iOS Devices & More 3.5mm and 2.5mm Headphone Outputs + Line Dual USB Audio Modes Separate DAC & Amp Functions Hi-Res Certified with Velvet Sound Tech Up to 384 kHz / 32-Bit Support DSD256 Support Coaxial and Optical Digital Outputs USB Cable Included Includes 4 Spare Foot Pads

Up to 512GB of expanded microSD storage (2x256GB not included) 2 operating modes Bluetooth 4.0 2.4GHz Wi-Fi 3.97in touch screen

3.2" 2.5D Curved Glass IPS Touchscreen 480 x 800 Native Resolution at 292 ppi 2GB of Storage + Up to 2TB microSD Samsung Exynos 7270 Processor

Handles PCM Files up to 24-bit/96 kHz Selectable Bass Boost Front-Panel 1/8" Headphone Output Coaxial Digital Output

THREE DRIVERS- F9 SE has two balanced armatures and a separate dynamic driver. The 9.2mm dynamic driver is specifically tuned to produce bottomless lows while the two BA drivers precisely portray extended upper-mids and highs. Intelligent Control - Hi-Resolution Audio Certified for frequency response up to 40kHz,which can fully reproduce the audio and...